- Valves
- Pipe Fittings
- Pipe Flanges
- Stainless Steel Pipe Flanges
- 317L Pipe Flanges
- Duplex 2205 Pipe Flanges
- Alloy 20 (A20) Pipe Flanges
- Hastelloy C276 Pipe Flanges
- Alloy 600 Pipe Flanges
- Aluminum 6061 Pipe Flanges
- Chrome Moly Alloy Pipe Flanges
- A105 Carbon Steel Lap Joint Flanges
- Ductile Iron (DI) Backup Angle Ring
- Ductile Iron (DI) Backup Flanges
- Slip On Angle Rings
- Pipe
- Tubing
- Material Grades
- Machining & Modification Services
Y Strainers
Complete Solutions for Industrial Valve Manufacturing
Click image to enlarge Warren Y-Strainers are offered in a variety of different body types, materials and configurations that will fit most all of your strainer needs.
Strainers may be used in many different types of liquid applications, but a Y-Strainer is considered standard for steam applications and is almost universally used for this application. Besides steam, Y-Strainers are often used in air and natural gas applications.
Unlike other types of strainers, a Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position. Obviously, in both cases, the screening element must be on the "down side" of the strainer body so that the entrapped material can properly collect in it.
Some manufactures reduce the size of the Y -Strainer body to save material and cut cost. Before installing a Y-Strainer, be sure it is large enough to properly handle the flow. A low-priced strainer may be an indication of an undersized unit.
Warren Valve offers three styles of cast stainless steel y-strainers. Warren strainers are designed in accordance with ASME B16.34 and pressure tested in accordance with API 598, where applicable.
- Trim Material: In accordance to body materials as listed
- See details for screen details
| Sizes: | 1/4” - 14” |
|---|---|
| Pressures: | ASME Classes
|
| Materials: | A 351 CF8M |
| Ends: |
|
Cast Stainless Steel
Forged Stainless Steel
ANSI B16.34 DESIGNS
Warren Valve offers one styles of forged stainless steel y-strainers. Warren strainers are designed in accordance with ASME B16.34 and pressure tested in accordance with API 598, where applicable.
- Trim Material: In accordance to body materials as listed
- See details for screen details
| Sizes: | 1/4” - 2” |
|---|---|
| Pressures: |
|
| Materials: | A 182 F316 |
| Ends: |
|
For more information about our products, please contact a representative!